Back to Teltonika

Teltonika NTP001 NTP Server

Teltonika NTP001 NTP Server is designed for synchronizing accurate and UTC-traceable time in public and private networks without requiring internet access. This stratum-1 NPT server features RS232 and RS485 interfaces, Ethernet NTP ±1ms overall NPT accuracy, -146dBm acquisition sensitivity, and MODBUS TCP status/control. The NTP001 NTP server operates from -40°C to 75°C temperature range and 10% to 90% non-condensing humidity range. This server is IP30-rated and complies with CE, UKCA, CB, UCRF, EAC, and WEEE regulations.

Features

  • 1 x LAN port, 10/100Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, and supports auto MDI/MDIX crossover
  • Network:
    • TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP, SNMP, and MQTT
    • Ping reboot, Wget reboot, and periodic reboot connection monitoring
    • >25 service DDNS-supported providers, others can be configured manually
  • Security:
    • Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS users authentication, IP and login attempts block, time-based login blocking, and built-in random password generator
    • Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
    • Flexible access control of SSH, Web interface, CLI, and Telnet
    • 802.1x port-based network access control client
  • NTP:
    • Server receives time from GPS and acts as a NTP server to broadcast time for other devices (Stratum 1). Broadcast time through UDP or over serial (RS232, RS485)
    • Daytime Protocol TCP/UDP
    • Date over Serial RS232/RS485
    • NTPv4, NTP authentication (MD5/SHA1), unicast/multicast/broadcast mode
    • NTP stratum 1 time server (NTPv4) protocol
    • Ethernet NTP ±1ms overall NTP Accuracy
    • >300 NTP requests per second (wire speed)
    • Synchronization accuracy LAN synchronization typically 1ms to 10ms
  • Location tracking:
    • GPS, GLONASS, BeiDou, Galileo, and QZSS
    • -146dBm acquisition sensitivity, -157dBm reacquisition sensitivity, and -157dBm tracking sensitivity
    • CEP-50 open sky 2.5m
    • Source GPS 1575.42 ±1.023MHz, GLONASS 1597.5MHz to 1605.8MHz, Galileo 1575.42 ±2.046MHz, BDS 1561.098 ±2.046MHz
    • Startup cold GPS acquisition in 120 seconds
  • Power:
    • 2-pin in 16-pin industrial terminal block
    • Input voltage range 9VDC to 30VDC, overvoltage protection, reverse polarity protection, and surge protection +/-1kV 50μS maximum
    • 3.5W power consumption
  • Physical interfaces: 
    • 1 x RJ45 ports and 10/100Mbps Ethernet
    • I/O’s 3 x configurable I/O and 1 x analog input in 16-pin terminal block
    • 1 x Power, 2x GNSS status LEDs, 1x NTP server status LED, and 3 x IO status LEDs
    • Power 1 x 16-pin terminal block
    • 1 x SMA Antenna for GNSS
    • RS232 4-pin in 16-pin terminal block (TX, RX, RTS, CTS)
    • RS485 4-pin in 16-pin terminal block (D+, D-, R+, R-)
    • Reboot/User default reset/Factory reset button
  • Physical specification:
    • Anodized aluminum housing and panels
    • 82.6mm x 25mm x 83mm dimensions
    • Weight 180g
    • DIN rail, wall mount, and flat surface (all require additional kit) mounting options
  • Operating environment:
    • -40°C to 75°C temperature range
    • 10% to 90% non-condensing humidity range
    • IP30 ingress protection rating
  • CE, UKCA, CB, UCRF, EAC, and WEEE regulatory

Kit Contents

  • NTP001 GNSS NTP time server
  • 16-pin terminal block
  • Quick Start Guide (QSG)
  • Packaging box
Teltonika NTP001 NTP Server

Overview

Teltonika NTP001 NTP Server

Videos

For support and assistance, please reach out to Mouser's Technical Support team at https://www.mouser.com/contact/.

Published: 2025-02-20 | Updated: 2025-04-29