Sensirion SEK-STC42A Evaluation Kit
Sensirion SEK-STC42A Evaluation Kit represents the perfect tool kit for practical STC42A sensor evaluation and efficient prototyping. The STC42A is an automotive-grade hydrogen (H2) sensor for thermal runaway detection. The Sensirion SEK-STC42A Evaluation Kit comes with an STC42A development board and an adapter cable. A sensor bridge (SEK-SensorBridge) is required to connect the SEK-STC42A Evaluation Kit to a computer. The sensor bridge is sold separately.
Features
- Plug-and-play measurements
- Real-time signal plotting
- Automatic data logging
- Configure sensor
Applications
- Battery thermal runaway detection
- Hydrogen leakage
- Thermal propagation
Specifications
- Generic
- 2.8V to 3.6V supply voltage
- 1mA average supply current
- 5mA maximum supply current
- I2C interface
- 27mm x 20mm x 5mm (LxWxH) size
- Hydrogen
- Measurement range is 0 to 40 (vol%)
- -40°C to +85°C operating temperature range
- 1s response time
- 16-bit resolution
Kit Contents
- STC42A development board
- Adapter cable
- The sensor bridge (SEK-SensorBridge) is required and must be ordered separately
Application Circuit
Related Sensors
Sensirion STC42A Automotive Hydrogen Thermal Runaway Sensor
Monitors hundreds of EV battery cells and can detect a fault in a single cell.
Sensirion SHT41A Automotive Humidity & Temperature Sensors
2.3V to 5.5V supply voltage, AEC-Q100 qualification, and relative humidity accuracy of up to ±2%RH.
Development Tool
Sensirion SEK-SensorBridge Environmental Sensing Kit
Enables the development of sensor applications with proprietary plug-and-play hardware.