SparkFun Accessories

Results: 944
Select Image Part # Mfr. Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity. Qty. RoHS ECAD Model Product Type
SparkFun SparkFun Accessories This is a very simple but extremely handy 1" square single sided perf board. Standard 0.1" spacing with a 4-40 (3mm) hole for mounting. Every three holes are connected with a 20mil trace.Package of 2 222In Stock
Min.: 1
Mult.: 1
No
SparkFun SparkFun Accessories Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for projects where the wire has a bend or stress point. Comes in small spools of 25'. 9In Stock
Min.: 1
Mult.: 1
Wire & Cable
SparkFun SparkFun Accessories Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for projects where the wire has a bend or stress point. Comes in small spools of 25'. 6In Stock
15Expected 8/27/2026
Min.: 1
Mult.: 1
Wire & Cable
SparkFun SparkFun Accessories Angle Bracket - 4-40 93In Stock
Min.: 1
Mult.: 1
No
Accessories Mounting Hardware
SparkFun SparkFun Accessories This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm center-positive female barrel jack. If you have a power supply with a barrel jack and want to plug it into a breadboa 132In Stock
Min.: 1
Mult.: 1
No
Adapters
SparkFun SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on the other end with a mating socke 80In Stock
Min.: 1
Mult.: 1
No
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on the other end with a mating socket 263In Stock
Min.: 1
Mult.: 1
No
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories micro:bit Battery Holder 2xAA (JST-PH) 11In Stock
20Expected 9/7/2026
Min.: 1
Mult.: 1
No
Battery Holders Two-Cell AA Battery Holder
SparkFun SparkFun Accessories Photon Stackable Header- 12 Pin 173In Stock
Min.: 1
Mult.: 1
No
Headers 12 Pin Photon Stackable Header
SparkFun SparkFun Accessories Multicolor Buttons- 4 pack 109In Stock
Min.: 1
Mult.: 1
No
Accessories 4 - Pack Multicolor Button
SparkFun SparkFun Accessories With the SparkFun Qwiic Connect System expanding every day we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Grove Adapter Cable allows interoperability 419In Stock
Min.: 1
Mult.: 1
No
Cables Adapter Cable - 150 mm
SparkFun SparkFun Accessories Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard your own 10-key or just a custom input for your computer Cherry MX switches give you that satisfying keyboard click. Now we 56In Stock
Min.: 1
Mult.: 1
No
Accessories Cherry MX Keycap - R2 (Translucent)
SparkFun SparkFun Accessories This sturdy carrying case is great for carrying anything from tiny components to medium-sized tools. With its adjustable dividers it could be used to organize the parts on your workbench or you can take it on the road with you for portable assembly 11In Stock
Min.: 1
Mult.: 1
No
Enclosures Adjustable Storage Case
SparkFun SparkFun Accessories Here is a simple low-cost high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60 This is a small servo with a standard 3 pin power and control cable (red = 1In Stock
Min.: 1
Mult.: 1
Accessories Servo Motor
SparkFun SparkFun Accessories Mini Photocell 112In Stock
Min.: 1
Mult.: 1
No
Optoelectronics Photoelectric Sensors
SparkFun SparkFun Accessories Translating physical forces into digital data usually requires managing multiple components but the SparkFun Qwiic Scale simplifies the entire process. With the on-board NAU7802 this Qwiic breakout board acts as an all-in-one amplifier and Analog-t 6In Stock
130Expected 10/9/2026
Min.: 1
Mult.: 1
No
Breakout Boards Qwiic Scale
SparkFun SparkFun Accessories Resistor Lead Bending Tool 87In Stock
Min.: 1
Mult.: 1
No
Tools & Supplies Hand Tools
SparkFun SparkFun Accessories One ruler to rule them all. This is a basic 12 inch ruler but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes transistor diagrams common fracti 22In Stock
Min.: 1
Mult.: 1
No
Tools & Supplies PCB Ruler - 12 Inch
SparkFun SparkFun Accessories SOIC to DIP Adapter - 28-Pin 8In Stock
Min.: 1
Mult.: 1

Adapters
SparkFun SparkFun Accessories Rotary Switch Switch 1In Stock
Min.: 1
Mult.: 1
Switches
SparkFun SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing 2In Stock
10On Order
Min.: 1
Mult.: 1
Breakout Boards
SparkFun SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc.Dimensions: 36" Long 7In Stock
Min.: 1
Mult.: 1
Cables
SparkFun SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc. Cables come in red/black pairs.Dimensions: 36" Long 79In Stock
Min.: 1
Mult.: 1
Cables
SparkFun SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc. High quality coax cable with stress relief sleeves.Dimensions: 36" long 8In Stock
Min.: 1
Mult.: 1
Cables
SparkFun SparkFun Accessories These are various leaded cables for attaching to multimeters power supplies oscilloscopes function generators etc. Cables come in red/black pairs.Dimensions: 36" long 41In Stock
Min.: 1
Mult.: 1
Cables