SparkFun Tools & Supplies

Results: 1.015
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS
SparkFun SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Datasheet
243In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Screw Terminals 2.54mm Pitch 2-Pin 69In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relie 111In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories DC Barrel Power Jack Connector SMD
Datasheet
81In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Stackable Header 3 Pin, Female 0.1in 89In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are simple 6-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.
Datasheet
6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Piezo Element 108In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder. Mix: 63% Sn / 37% Pb 4In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Datasheet
7In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Electret Microphone 20In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Rocker Switch SPST (right-angle) 32In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the 15In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories The new generation 18 pin PICAXE microcontroller now has parallel tasking touch sensors and more memory/RAM.See the Info Sheet for a comparison of features between the 18M2 and the 18M2+PICAXE is a neat entry-level microcontroller system that is rel 14In Stock
35Expected 9/28/2026
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button but it lights up green! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't e
Datasheet
14In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which direction the shaft is turning and by how much. This allows you to add feedback to motor control systems. Encoders of thi 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This little round on/off toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll also look pretty slick in your project.
Datasheet
64In Stock
160Expected 11/10/2026
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a single pole 10 position rotary switch able to select up to 10 different states in a durable package. Unlike our other rotary switch this model is much more robust and capable of handling larger currents and voltages. You may find this rot 114In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky reliable up to tens-of-millions of key presses and a standard in gaming and programming keyboards across the globe. This 'blue' version Cher 7In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Amphenol FCI Clinchr Conn. (2 POS,M)
Datasheet
18In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories TRRS connectors are the audio-style connectors that you see on some phones MP3 players and development boards. TRRS stands for "Tip Ring Ring Sleeve " which reflects the fact that unlike a standard stereo connector this actually has three condu 77In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Break Away Male Headers Right Angle 16In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories Screw Terminals 5mm Pitch (3-Pin)
Datasheet
40In Stock
Min.: 1
Mult.: 1

SparkFun SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumper 1In Stock
10Expected 9/21/2026
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a right-angle 24-pin Molex Mini-Fit Jr. connector commonly used as the power supply connector on ATX motherboards. Two rows of twelve pins are broken out two rows of through-hole male headers. See the datasheet below for pin spacing dime 18In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.
Datasheet
46In Stock
Min.: 1
Mult.: 1