SparkFun Tools & Supplies

SparkFun Accessories This blue Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room no

SparkFun Accessories One-Wire Ambient Temp Sensor MAX31820

SparkFun Accessories These are very small surface mount quartz crystals used where size is a concern. Ideal for use with the nRF2401 ICs. 20ppm * 18pF load capacitance

SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding

SparkFun Accessories Screw Terminals 3.5mm Pitch (2-Pin)

SparkFun Accessories This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room n

SparkFun Accessories The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out micro:bits for p

SparkFun Accessories This is a USB 2.0 type B to Micro-B 5-pin black cable. You know the mini-B connector that usually comes with cell phones Cameras MP3 players etc. We specifically like these 6" long cables because using USB peripherals in projects within a small e

SparkFun Accessories The MCP3002 has a 10-bit analog to digital converter (ADC) with a simple to use SPI interface. Use this IC if your microcontroller does not have an ADC or have enough ADC lines. A great chip when you need to add additional ADC lines.Features:2.7V to

SparkFun Accessories This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover.

SparkFun Accessories It's the end of the world and you need to press a button. This is it. This gigantic 100mm yellow dome button is the perfect dramatic centerpiece for interactive exhibits escape rooms or custom arcade builds. It features a built-in LED indicator to