|
|
SparkFun Accessories 2x5 Pin Shrouded Header
- PRT-08506
- SparkFun
-
1:
1,55 €
-
36In Stock
|
Mouser Part No
474-PRT-08506
|
SparkFun
|
SparkFun Accessories 2x5 Pin Shrouded Header
|
|
36In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Heat Sink Compound
- PRT-09599
- SparkFun
-
1:
2,37 €
-
236In Stock
|
Mouser Part No
474-PRT-09599
|
SparkFun
|
SparkFun Accessories Heat Sink Compound
|
|
236In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 2x3 Pin Shrouded Header
- PRT-10877
- SparkFun
-
1:
1,55 €
-
31In Stock
|
Mouser Part No
474-PRT-10877
|
SparkFun
|
SparkFun Accessories 2x3 Pin Shrouded Header
|
|
31In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Stackable Header 2x23 Pin Female
- PRT-12790
- SparkFun
-
1:
2,84 €
-
367In Stock
|
Mouser Part No
474-PRT-12790
|
SparkFun
|
SparkFun Accessories Stackable Header 2x23 Pin Female
|
|
367In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12807
- SparkFun
-
1:
0,688 €
-
44In Stock
|
Mouser Part No
474-PRT-12807
|
SparkFun
|
SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
44In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
- PRT-15187
- SparkFun
-
1:
2,03 €
-
42In Stock
|
Mouser Part No
474-PRT-15187
|
SparkFun
|
SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
|
|
42In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Soldering Iron Stand
- TOL-09477
- SparkFun
-
1:
6,67 €
-
2In Stock
|
Mouser Part No
474-TOL-09477
|
SparkFun
|
SparkFun Accessories Soldering Iron Stand
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
- WRL-00145
- SparkFun
-
1:
12,86 €
-
3In Stock
|
Mouser Part No
474-WRL-00145
|
SparkFun
|
SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
- WRL-00558
- SparkFun
-
1:
15,91 €
-
6In Stock
|
Mouser Part No
474-WRL-00558
|
SparkFun
|
SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
- WRL-09143
- SparkFun
-
1:
8,56 €
-
76In Stock
|
Mouser Part No
474-WRL-09143
|
SparkFun
|
SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
|
|
76In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
- WRL-09145
- SparkFun
-
1:
4,95 €
-
111In Stock
|
Mouser Part No
474-WRL-09145
|
SparkFun
|
SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
|
|
111In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
- WRL-15114
- SparkFun
-
1:
2,37 €
-
51In Stock
|
Mouser Part No
474-WRL-15114
|
SparkFun
|
SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
|
|
51In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se
- CAB-12977
- SparkFun
-
1:
18,95 €
-
15In Stock
|
Mouser Part No
474-CAB-12977
|
SparkFun
|
SparkFun Accessories This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se
|
|
15In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Electrolytic decoupling capacitors 100uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of your project to ensure smooth power delivery. High quality radial electrolytic capacitors.
- COM-00096
- SparkFun
-
1:
0,43 €
-
103In Stock
|
Mouser Part No
474-COM-00096
|
SparkFun
|
SparkFun Accessories Electrolytic decoupling capacitors 100uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of your project to ensure smooth power delivery. High quality radial electrolytic capacitors.
|
|
103In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Crystal 16MHz
- COM-00536
- SparkFun
-
1:
1,08 €
-
25In Stock
|
Mouser Part No
474-COM-00536
|
SparkFun
|
SparkFun Accessories Crystal 16MHz
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.Fe
- COM-09592
- SparkFun
-
1:
0,43 €
-
56In Stock
|
Mouser Part No
474-COM-09592
|
SparkFun
|
SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a green lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.Fe
|
|
56In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections! The outer shell unscrews to reveal solder te
- COM-11143
- SparkFun
-
1:
0,645 €
-
25In Stock
|
Mouser Part No
474-COM-11143
|
SparkFun
|
SparkFun Accessories This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections! The outer shell unscrews to reveal solder te
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.Fea
- COM-11372
- SparkFun
-
1:
0,645 €
-
19In Stock
|
Mouser Part No
474-COM-11372
|
SparkFun
|
SparkFun Accessories LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.Fea
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to 6 different kinds of coin! Whether you're building your own arcade cabinet or just charging admission to your house this programmab
- COM-11636
- SparkFun
-
1:
72,03 €
-
3In Stock
|
Mouser Part No
474-COM-11636
|
SparkFun
|
SparkFun Accessories Are you trying to make a quick dime from electronics? Why limit yourself to dimes? This coin acceptor will take up to 6 different kinds of coin! Whether you're building your own arcade cabinet or just charging admission to your house this programmab
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories It's your basic red action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads) i
- COM-11992
- SparkFun
-
1:
1,08 €
-
50In Stock
-
30On Order
|
Mouser Part No
474-COM-11992
|
SparkFun
|
SparkFun Accessories It's your basic red action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads) i
|
|
50In Stock
30On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories LED - Assorted (20 pack) Diameter 5mm
- COM-12062
- SparkFun
-
1:
4,13 €
-
16In Stock
|
Mouser Part No
474-COM-12062
|
SparkFun
|
SparkFun Accessories LED - Assorted (20 pack) Diameter 5mm
|
|
16In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.The FTDI cable is designed around an FT232RQ which is hous
- DEV-09718
- SparkFun
-
1:
22,32 €
-
45In Stock
|
Mouser Part No
474-DEV-09718
|
SparkFun
|
SparkFun Accessories The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this FTDI cable are configured to operate at 5V.The FTDI cable is designed around an FT232RQ which is hous
|
|
45In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins
- LCD-00709
- SparkFun
-
1:
21,65 €
-
12In Stock
|
Mouser Part No
474-LCD-00709
|
SparkFun
|
SparkFun Accessories This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need 11 general I/O pins to interf
- LCD-09053
- SparkFun
-
1:
19,35 €
-
40In Stock
|
Mouser Part No
474-LCD-09053
|
SparkFun
|
SparkFun Accessories This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need 11 general I/O pins to interf
|
|
40In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Do you need *a lot *of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. TransFlash has now completed standards certification and is now known as microSD. Compatible with the SPI interface found on any SD c
- PRT-00127
- SparkFun
-
1:
4,26 €
-
35In Stock
|
Mouser Part No
474-PRT-00127
|
SparkFun
|
SparkFun Accessories Do you need *a lot *of space? But you need it in the size of your pinky nail? microSD (uSD) is here to save the day. TransFlash has now completed standards certification and is now known as microSD. Compatible with the SPI interface found on any SD c
|
|
35In Stock
|
|
Min.: 1
Mult.: 1
|
|
|