Amphenol PCD Newest Tools & Supplies
Types of Tools & Supplies
Applied Filters:
Brand
= Amphenol PCD
Return to the Products tab to modify your current filters.
Amphenol Extraction & Insertion Tools
04.17.2026
04.17.2026
Provides the safe and efficient removal and installation of RF connector contacts and modules.
Amphenol ATPH 3-Position Connectors
05.05.2025
05.05.2025
Thermoplastic solution with environmental seals and snap-fit end caps for rear seal retention.
Amphenol FitMate™ 0.80mm Wire-to-Board Connectors
03.06.2024
03.06.2024
Modular and fine-pitch solution for devices that require compact and low-profile connectors.
Amphenol Crimp Tools
02.16.2024
02.16.2024
Easy to operate, ideal for prototyping and small production series, reliable and consistent results.
Amphenol Application Tooling
12.12.2023
12.12.2023
Designed to eliminate nicked outer braids, crushed cores, and improper strip lengths.
Amphenol Amphe-PRB Reverse Bayonet Plastic Connectors
08.30.2023
08.30.2023
Economical and robust connectors that are ideal for outdoor use.
Amphenol LMR® TK-400/400-75EZ-HC Tool Kit
07.21.2023
07.21.2023
Includes the CT-400/300 crimp tool, CST-400 prep tool, CST-400-75 prep tool, & CCT-03 cutting tool.
Amphenol A Series™ Crimp Tools
07.13.2023
07.13.2023
Available in either a kit or as individual crimping tools in size 20, size 16, and size 12.
Amphenol Crimping Hand Tools
06.21.2023
06.21.2023
Professional-grade tools for applications in the prototyping phase or small production quantities.
Amphenol Heavy Duty Power Connectors
05.30.2023
05.30.2023
Designed as a high-performance, cost-effective signal and power transmission solution.
Amphenol ATS Series™ Superior Seal PCB Connectors
04.28.2023
04.28.2023
Rectangular, plastic PCB connectors ideal for harsh environment applications.
Amphenol MicroSpaceXS™ Extraction Tools
04.05.2023
04.05.2023
Designed to remove the TPA and CTW terminals when the harness is being reworked.
Amphenol MIL-HD2 Next-Gen VITA 91 Connectors
03.24.2023
03.24.2023
Designed to achieve 56Gb/s PAM4 data rate requirements with a higher density of 1.8mm pitch.
Viewing: 1 - 13 of 13
TE Connectivity RFFLX RayFlite High-Voltage Flex Power Cables
08.03.2026
08.03.2026
High flexibility, finished cable target weight as low as 99kg/km, for urban air mobility and UAVs.
Chip Quik Sn10/Pb88/Ag2 No-Clean Flux Core Solder Wire
07.30.2026
07.30.2026
Features 2.2% flux core that is easier to use than a solid core, especially for automated soldering.
Chip Quik DECSIL UV Dielectric Silicone Grease
07.30.2026
07.30.2026
Translucent electronics-grade grease that features an ultraviolet (UV) tracer.
M5Stack A181 Repair Kit for Stackchan
07.17.2026
07.17.2026
Designed for the repair, part replacement, and routine maintenance of StackChan AI Desktop Robots.
M5Stack K138-V11 M5Stamp Fly v1.1 with M5StampS3A
07.17.2026
07.17.2026
Programmable open-source quadcopter kit that offers an upgrade to the Stamp Fly series.
M5Stack Stick Watch Accessory Kit
07.09.2026
07.09.2026
Wearable accessory set for M5Stick-based smartwatch and mounting projects.
Sherex SSG Pneumatic Spin-Spin Tools
06.19.2026
06.19.2026
Air-powered pistol-grip and inline rivet nut installation tools for thin-wall insert applications.
Sherex FLEX-5 Power Tools & Headset Assemblies
06.19.2026
06.19.2026
Hydro-pneumatic rivet nut tools with matched headset assemblies for 6-32 to 3/8-24 and M3 to M10.
Sherex HS Spin-Spin Tool Headsets
06.19.2026
06.19.2026
Complete assemblies for use with Sherex SSG pneumatic spin-spin rivet nut installation tools.
Sherex RNHT Rivet Nut Hand Tools
06.19.2026
06.19.2026
Manual installation tools for rivet nuts across a size range from 6-32 to 3/8-16 and M3 to M10.
M5Stack StampFly Accessory Kit
06.02.2026
06.02.2026
Designed for the M5Stamp Fly quadcopter to replace components that commonly wear over time.
DFRobot 20cm Male-to-Male Cable for UNIHIKER
05.13.2026
05.13.2026
A high-performance expansion cable kit for UNIHIKER M10 and K10 mainboards.
DFRobot UNIHIKER M10 Python Starter Kit
05.05.2026
05.05.2026
A curated grouping of DFRobot Gravity series sensors and actuators, with 15 progressive tutorials.
DFRobot micro:bit & UNIHIKER K10 Building Block Board
05.05.2026
05.05.2026
A versatile wireless controller hub compatible with micro:bit, UNIHIKER K10, and UNIHIKER M10.
Amphenol Extraction & Insertion Tools
04.17.2026
04.17.2026
Provides the safe and efficient removal and installation of RF connector contacts and modules.
Chip Quik Dispensing Tips
02.12.2026
02.12.2026
Excellent for dispensing dots and lines of flux, solder paste, and other fluids.
3M MSG7000SDX Electrically Conductive Gasket Tapes
02.12.2026
02.12.2026
Compressible gasket material that combines foam, fabric, and adhesive for consistent conductivity.
DFRobot FIT1033 Flexible RGB LCD Backlight Module
02.02.2026
02.02.2026
Versatile, thin-profile light-emitting panel designed for embedded systems and custom illumination.
DFRobot MBT0046 Maqueen Lite V5 micro:bit Robot Kit
01.28.2026
01.28.2026
Offers smooth, frustration‑free learning experiences in coding, robotics, and IoT education.
DFRobot FIT0913 PH2.0-3P Male-to-Male Cable (10-Pack)
01.28.2026
01.28.2026
Ideal solution for use with Boson modules and the UNIHIKER development platform.
DFRobot HUSKYLENS 2 Microscope Camera Module
01.28.2026
01.28.2026
Provides approximately 30x magnification with a 6mm focal length lens and a 2MP GC2093 image sensor.
DFRobot MBT0050x Maqueen Plus V3 micro:bit Robots
01.28.2026
01.28.2026
STEM‑focused educational platforms designed to elevate robotics learning & competition performance.
Chip Quik SMD2088-6000 BGA Solder Spheres
01.26.2026
01.26.2026
1.1mm-diameter lead-free spheres for larger soldering projects.
Weidmuller swifty® CS 3-in-1 Smart Cable Cut & Strip Tool
11.13.2025
11.13.2025
All-in-one tool that provides a fast and effortless solution for cutting and stripping cables.
Viewing: 1 - 25 of 176
